Mirco Scan MS300

MS300

FEATURES

Flexible user interface that speeds signal detection.

Continuous scanning allows easy detection of burst mode transmissions, providing real-time protection.

Spectrum analyzer displays integrates signals over a period of time to allow the detection of very low power and ?snugger? bugs

On screen demodulation allows analysis of digital bug signals

Carrier Detect Mode optimized for detection of spread spectrum devices

High sensitivity broadband antenna with automatic antenna selection

Unique automatic sweep for analogue bugs

Ultra-high sweep suitable for FM, AM and sub-carrier devices from 10 kHz ? 3 GHz in 4 minutes.

Carrier Detect Function identifies and classifies all radio signals

Allows comparison of previous saved scans and current radio signals

Mains cable checking function

Contains GSM detector that operates on all international GSM bands, running continuously in parallel to the main receiver

The Microscan MS300 is a high sensitivity counter surveillance receiver that allows the detection of all major types of convert radio transmitter threat.

The RF Spectrum is becoming increasingly crowded with less equipment and more people, requiring the detection of more signal types.

The MS 300 delivers the speed, sensitivity, dynamic range and selectivity necessary to detect signals effectively, with frequency coverage from 10 kHz to 3 GHz (up to 15 GHz with optional MDC).

The MS300 puts an end to compromise.

TECHNICAL SPECIFICATIONS

Receiver

Frequency Range
10 kHz ? 3 GHz(minimum accepted frequency input 5 kHz, up to 15 GHz with optional MDC)

Tuning resolution 1 Hz

IF bandwidth 500 Hz, 3 kHz, 6 kHz, 15 kHz, 40 kHz, 110 kHz, 220 kHz

Attenuators 10 dB, 20 dB

Sensitivity

Received frequency Sensitivity

10 kHz -40 kHz 63 ? V

40 kHz - 100 kHz 4.46 ? V

100 kHz -2 MHz 2.23 ? V

2 MHz -40 MHz 0.56 ? V

40 MHz - 1000 MHz 0.4 ? V

1 GHz ? 3 GHz 0.36 ?V

Operating voltage 10 ? 240 V, 50/60 Hz

Maximum operating 1 A
current

Operating temperatures 0`C ? 40`C

Antenna

10 kHz - 150 MHz Active Loop Antenna

150 MHz ? 3 GHz Planar Spiral Antenna

Mains coupler 10 kHz ? 5 MHz

External antenna input N-type

PC interface USB 2.0 high speed, 480 Mbps

Scan time Pentium 4, (2.6 GHz) 10 kHz ? 3 GHz, 4 minutes

GSM Detectors

Frequency ranges 900 MHz, 1800 MHz, 1900 MHz

Detection modes Network call, text message, active call

Sensitivity ranges 10m, 25m

EMC Standards Applied

ETS 300 339, EN300 -220-1, EN300-220-3, EN301- 489-9 and EN60950