Barrett Antenna 10 Mtr Mast 18Kg
The mast consists of 5 x 2 m aluminium sections inserted on top of each other with a 90 degree top section out rigger.
There are 2 sets of 3 wire guys and one back stay wire to counter the weight of the antenna. Erection of the mast is possible utilising two persons. Once all sections are assembled, as per the diagram below, and the cleats and base plate have been positioned, simply lift the mast into position and tighten the guy wires.
Specifications
Guy Support Spacing
Minimum 5 metres / maximum 6 metres from mast base, at 120-Degree intervals around 360-Degrees arc.
Packed Dimensions
2000 mm x 200 mm x 350 mm
Packed Weight
18Kg
Wind
120Kph
| Barrett 10 Mtr | Barrett Antenna 10 Mtr Mast 18Kg |
Manufacturer: Barrett
Barrett Communications is an international, leading manufacturer of long distance high frequency communications equipment.
Category: Radios
SubCategory: Ancillaries
Class: UK Product
Type: New Item