Vertex Standard VXR-9000 VHF/UHF 10/25/50Watts

Main Features:

• WIDE OR NARROW BANDWIDTH
• PROGRAMMABLE PER CHANNEL
• PLL STEP SIZES: 2.5/5.0/6.25 kHz
• LOW LEVEL AND HIGH LEVEL ENCRYPTION OPTIONS
• 8 cm SQUARE COOLING FAN WITH
• "MALFUNCTION" SENSOR OUTPUT
• CTCSS REVERSE BURST WITH
• PROGRAMMABLE LENGTH
• MULTI-TONE DECODE
• 5-STEP COMMAND SEQUENCE FOR STARTUP
• POWER SOURCE: MAIN TO SUB, AND SUB TO MAIN
• CW ID AND CW MESSAGES SELECTED BY TRIGGER
• COAXIAL RELAY DRIVERS FOR SINGLE
• ANTENNA OPERATION; ALSO TX ATTENUATOR
• PROGRAMMED MESSAGE BANKS FOR
• FREQUENCY RANGE: 146 – 174 MHz (VHF)
• MAINTENANCE LOGS OR ANY OTHER FREE TEXT
• REPEATER OCCUPATION SETTINGS TO HOLD
• THE LAST TONE CODE (PRESET TIMER)

25 WATTS OF POWER

The VXR-9000E provides 25 Watts of clean, reliable power output in its standard configuration.

EXCELLENT RECEIVER PERFORMANCE

The VXR-9000E is crafted to survive in the most difficult RF environments. Outstanding selectivity, intermodulation rejection, and spurious and image rejection performance ensure reliable service during peak spectrum congestion times.

AUDIO COMPANDING PER CHANNEL

The VXR-9000E’s versatile configuration capability permits inclusion of narrow-band, compandered channels among wide-band, non-compandered channels.

DC BACKUP WITH ALERT

Should DC power fail at the repeater site, the VXR-9000E will automatically revert to a backup DC power source, if available. Under emergency DC power, the repeater will transmit an alert message, to alert the communications supervisor that the DC power situation requires immediate attention at the repeater site.

CONSERVATIVE DESIGN FOR HIGH RELIABILITY

The large-diameter cooling fan (8 cm) is thermostatically controlled, ensuring a stable temperature environment for the VXR-9000E. Fan operation may be programmed via software (Off, Continuous, or Temperature-Controlled), and a "Malfunction" alarm is provided.

READY FOR RACK MOUNTING

For easy integration into existing repeater sites, the VXR- 9000E is shipped ready for mounting in a standard 19"

32 CHANNEL CAPACITY

The VXR-9000E may be dealer-programmed with up to 32 channels over a wide frequency range, and may be operated either in a "Repeater" or "Base Station" mode, depending on your application.

Over twenty different functions are available for selection and assignment to any of the six dual-function programmable keys on the front panel of the VXR-9000E. These functions include Channel Up/Down, High/Low Power, Repeater/Base mode, Encryption On/Off, Transmit/Receive, Panel Lights On/Off, and many more!

DSUB 25-PIN ACCESSORY CONNECTOR ON REAR PANEL

For convenient interfacing to external controllers or other accessories, the rear-panel DSUB 25-Pin Accessory Jack provides access to important repeater circuitry without the need for a specialized connector.

PROGRAMMABLE MESSAGE BANKS

Enter date, subject, and notes such as programming or service memos, for recall at any time in the future.

SELECTABLE ENCRYPTION OPTIONS

The VXR-9000E may be set up for either rolling code or inversion-type encryption (optional module required). The security required by your customer is available for easy installation.

FIVE-STEP AUTOMATIC COMMAND SEQUENCE

During certain operating events (such as Startup, switch from main DC to backup DC, etc.) the VXR-9000E may be programmed to undertake an automatic sequence of commands, so it can be configured for the particular event. For example, if DC fails and the repeater switches to emergency DC, the repeater can be set up to switch to Low Power, send a CW ID advising of the DC power situation, and other auto-command sequences, as well.

TWO-TONE DECODE STARTUP

The VXR-9000E may be booted up using two-tone commands. Four popular two-tone formats are supported, and the precise frequencies of each of the two tones may be manually adjusted from 100 Hz to 5 kHz, in 0.1 Hz steps.

Frequency Range: VHF: 134-174MHz; UHF: 400-430 MHz, 440-470 MHz

Memory Channels: 32

Dimensions: 483mm x 88mm x 343mm (W x D x H)

Weight: 9.7kg

Download PDF Data Sheet:
Vertex-Standard-VXR-9000-VHF-UHF-10-25-50Watts-100131.pdf (689.16 KB)

Click to view, right click 'Save Target As' to download.
Av. Download Times:
28.8Kps: 50s
56Kps: 26s
256Kps: 6s

Manufacturer: Vertex Standard

We offer total system solutions to the world's commercial communication and public safety markets. Products include base repeaters to utility and mobile transceivers, and all meet the strictest national or regional standards. Our products have cleared the U.S. Department of Defense MIL810 standard, the IS (Intrinsically Safe) standard for use in emergency situations, and the ETIS standard in Europe.

Category: Base Station

Class: UK Product

Vertex Standard Fist Microphone

Genuine Vertex Standard Fist Microphone.

Compatible with:

• Vertex Standard VXR-9000 Series
• Vertex Standard VXR-7000
• Vertex Standard VX-2500
• Vertex Standard VX-2100
• Vertex Standard VX-3200/2500
• Vertex Standard VX-4100
• Vertex Standard VX-4200

Desktop Microphone

VX MD-11A8J Desktop Microphone

Compatible With:

• Vertex Standard VXR-9000 Series

Encryption Board Unit FVP-25

FVP-25 Encryption Board Unit

Compatible With:

• Vertex Standard VX-9000 Series

Rolling Code Encryption Board FVP-35

Vertex Standard Rolling Code Encryption Board Unit

Compatible With:

• Vertex Standard VXR-9000 Series

4 Wire Line Interface Unit FIF-9

Vertex Standard 4 Wire Line Interface Board Unit, FIF-9

Compatible With:

• Vertex Standard VXR-9000 Series